Airworthy Prep

Part 107 Operations Over People: Categories 1, 2, 3 and 4 Explained

Can you fly a drone over people under Part 107? The 107.39 baseline, Categories 1 to 4 in a table, open-air assembly limits quoted from the CFR, and what the test expects.

  • Part 107
  • 10 min read
  • Updated
On this page10 sections

Under Part 107 you may not fly a small drone over a person unless one of three things is true: the person is directly participating in the operation, the person is under a covered structure or inside a stationary vehicle that gives reasonable protection, or your flight meets the requirements of one of the four operational categories in Subpart D (14 CFR 107.39). Those categories (1 to 4) are what let you fly over people who are not part of your crew.

This guide uses the current text of 14 CFR part 107 and 14 CFR part 89 as of October 2026, plus Advisory Circular 107-2A (AC 107-2A, editorial update of May 2022) and the Remote Pilot ACS (FAA-S-ACS-10B).

The baseline rule: 107.39

Section 107.39 is short. It says no person may operate a small unmanned aircraft over a human being unless:

  • (a) that human being is directly participating in the operation of the small unmanned aircraft;
  • (b) that human being is located under a covered structure or inside a stationary vehicle that can provide reasonable protection from a falling small unmanned aircraft; or
  • (c) the operation meets the requirements of at least one of the operational categories specified in subpart D (14 CFR 107.39).

Subpart D then “prescribes the eligibility and operating requirements for civil small unmanned aircraft to operate over human beings or over moving vehicles … in addition to those operations permitted by § 107.39(a) and (b)” (14 CFR 107.100).

Direct participants include the remote pilot in command, another person who may be manipulating the controls, a visual observer, or crewmembers necessary for the safety of the operation (AC 107-2A, para 8.3). Safe cover is a structure or stationary vehicle that protects a person if the aircraft hits it (AC 107-2A, para 8.3).

You do not need a category if you keep clear of people. The AC suggests choosing a location where no people are expected, keeping a safe distance from non-participants, and not flying over moving vehicles (AC 107-2A, para 8.3). Part 107 sets no specific stand-off distance from people (AC 107-2A, para 8.3.1).

The four categories at a glance

Section 107.105 says a remote pilot in command may conduct operations over human beings only under 107.110 (Category 1), 107.115 and 107.120 (Category 2), 107.125 and 107.130 (Category 3), or 107.140 (Category 4), except as provided in 107.39(a) and (b) and 107.145 (14 CFR 107.105).

Category 1 Category 2 Category 3 Category 4
Aircraft 0.55 pounds or less on takeoff and throughout the operation, including everything on board or attached Designed so it will not cause injury equal to or worse than a transfer of 11 foot-pounds of kinetic energy from a rigid object Same idea, at 25 foot-pounds of kinetic energy Has an airworthiness certificate under part 21
Exposed rotating parts None that would lacerate human skin None that would lacerate human skin None that would lacerate human skin Not listed in 107.140
Paperwork No applicant requirements Aircraft listed on an FAA-accepted declaration of compliance and labeled Aircraft listed on an FAA-accepted declaration of compliance and labeled Flight Manual limits must not prohibit flight over people; maintenance rules apply
Where you may fly over people No closed-site condition in the rule (moving vehicles have their own rule, 107.145) No closed-site condition in the rule (moving vehicles have their own rule, 107.145) Closed or restricted-access site, or no sustained flight over people Per Flight Manual limits
Open-air assemblies Sustained flight barred unless 89.110 or 89.115(a) is met Sustained flight barred unless 89.110 or 89.115(a) is met Not allowed Sustained flight barred unless 89.110 or 89.115(a) is met

Sources for the table: 14 CFR 107.110, 107.115, 107.120(a), 107.125, 107.130(a), 107.140; AC 107-2A, paras 8.2 and 8.3.4 to 8.3.6.

Category 1: small and light

To use Category 1, the aircraft must weigh 0.55 pounds or less on takeoff and throughout each operation, “including everything that is on board or otherwise attached to the aircraft,” and must not contain exposed rotating parts that would lacerate human skin upon impact (14 CFR 107.110(a)). AC 107-2A adds the metric figure, 250 grams (AC 107-2A, para 8.3.4).

There is no declaration of compliance and no applicant requirement for Category 1 (AC 107-2A, para 8.3.4.2). The remote pilot is the one who must make sure the weight limit is met and there are no lacerating exposed parts (AC 107-2A, para 8.3.4.1).

Category 2: injury-based limit

Category 2 aircraft must be designed, produced or modified so they will not cause an injury “equivalent to or greater than the severity of injury caused by a transfer of 11 foot-pounds of kinetic energy upon impact from a rigid object,” have no lacerating exposed rotating parts, and have no safety defects (14 CFR 107.120(a)).

You must also use an aircraft that is listed on an FAA-accepted declaration of compliance as eligible for Category 2 and is labeled as eligible (14 CFR 107.115(a)). AC 107-2A says you can check the declaration at the FAA’s declaration of compliance portal and look for the label on the aircraft (AC 107-2A, para 8.3.5.1).

Category 3: higher energy, tighter location rules

Category 3 uses the same structure with a 25 foot-pound limit (14 CFR 107.130(a)(1)), the same declaration and label requirements (14 CFR 107.125(a)), and extra limits on where you fly. You must not operate over open-air assemblies of human beings, and you may operate above a human being only if one of these is true (14 CFR 107.125(b) and (c)):

  1. The operation is within or over a closed- or restricted-access site, and all human beings within the site are on notice that a small unmanned aircraft may fly over them.
  2. The aircraft does not maintain sustained flight over any human being unless that person is directly participating in the operation, or is under a covered structure or inside a stationary vehicle that can provide reasonable protection from a falling small unmanned aircraft.

Category 4: airworthiness certificate

Category 4 is for aircraft with an airworthiness certificate under part 21. The aircraft must be operated within the limits in the approved Flight Manual (or as the Administrator otherwise specifies), and those limits must not prohibit operations over human beings (14 CFR 107.140(a) and (b)). The owner must also meet maintenance and record requirements, which are satisfied by complying with part 43 and part 91, subpart E (14 CFR 107.140(c) and (d)).

Open-air assemblies: the exact wording

For Categories 1, 2 and 4, the rule text is the same sentence each time: “No remote pilot in command may operate a small unmanned aircraft in sustained flight over open-air assemblies of human beings unless the operation meets the requirements of either § 89.110 or § 89.115(a) of this chapter” (14 CFR 107.110(b), 107.115(b), 107.140(a)(2)).

Sections 89.110 and 89.115(a) are the Remote ID rules. Section 89.110 covers operating a standard remote identification aircraft, and 89.115(a) covers operating with a remote identification broadcast module (14 CFR 89.110, 89.115(a)). So for Categories 1, 2 and 4, sustained flight over an open-air assembly requires meeting one of those two Remote ID paths. Our Remote ID guide covers them.

For Category 3, there is no such option: the operation “must not” be over open-air assemblies of human beings (14 CFR 107.125(b)). AC 107-2A repeats this: Category 3 operations are not allowed over an open-air assembly of persons (AC 107-2A, paras 5.8 and 8.3.2.2).

Two more points from the AC:

  • “Sustained flight” has an exception. It does not include a brief, one-time transit over part of the gathering that is merely incidental to a point-to-point operation unrelated to the assembly (AC 107-2A, para 8.3.2.1).
  • The regulation does not define “open-air assembly.” The AC says the FAA decides case by case, based on the density of people not participating in the operation and the size of the operational area. Possible examples include sporting events, concerts, parades, protests, political rallies, community festivals, or parks and beaches during certain events. Less likely examples include families exiting a shopping center, casual sports without spectators, small groups relaxing in a park, or people on a bike path (AC 107-2A, para 8.3.6.4).

The AC also says the Category 1, 2 and 4 prohibition on sustained flight over open-air assemblies is subject to waiver (AC 107-2A, paras 8.3.2, 8.3.4 and 8.3.5.3). Our waiver guide explains the process.

Moving vehicles: 107.145

Flying over a person inside a moving vehicle is a separate rule. It requires that you operate under Category 1, 2, 3 or 4, and that for Categories 1, 2 and 3 the aircraft either remains within or over a closed- or restricted-access site (with everyone in moving vehicles in that site on notice) or does not maintain sustained flight over moving vehicles (14 CFR 107.145(a) and (b)). A Category 4 aircraft must have a part 21 airworthiness certificate and be operated within Flight Manual limits that do not prohibit flight over people in moving vehicles (14 CFR 107.145(c)).

Operations over people at night

The categories and their restrictions do not change at night (AC 107-2A, para 8.14). Night flying has its own rule, covered in our night operations guide.

What the knowledge test expects

Operations over people is Task E of Area I, Regulations, in the Remote Pilot ACS. Its objective is to determine that you know the operating rules of 14 CFR parts 89 and 107 and the associated requirements when operating over people (ACS FAA-S-ACS-10B, Area I, Task E, p. 7). The listed knowledge elements include:

  • UA.I.E.K1: remote pilot responsibilities when operating over people
  • UA.I.E.K3: category of operations, with a separate element for each of Categories 1, 2, 3 and 4
  • UA.I.E.K4 and K5: selecting an operational area, and minimum distances from a person
  • UA.I.E.K6 and K8: operations over moving vehicles, and closed and restricted access sites
  • UA.I.E.K13: declaration of compliance

The same task also lists topics like means of compliance, impact kinetic energy and exposed rotating parts (ACS FAA-S-ACS-10B, Task I.E, p. 7). Keep in mind the older Remote Pilot Study Guide (FAA-G-8082-22) is dated August 2016 and predates these rules, so use the CFR and AC 107-2A for this topic.

How to prepare

  1. Memorize the three exceptions in 107.39. Participant, covered structure or stationary vehicle, or a Subpart D category.
  2. Learn one number per category. 0.55 pounds, 11 foot-pounds, 25 foot-pounds, and a part 21 airworthiness certificate.
  3. Remember the odd one out. Category 3 alone has a flat ban on open-air assemblies. The others are tied to Remote ID.
  4. Practice with original questions on our Regulations topic page and read the Part 107 rules cheat sheet for the rest of the rules.

Common mistakes

  • Thinking Category 1 needs paperwork. It does not. The weight and rotating-parts conditions are the remote pilot’s to check (AC 107-2A, paras 8.3.4.1 and 8.3.4.2).
  • Forgetting accessories count toward 0.55 pounds. The limit includes everything on board or attached (14 CFR 107.110(a)(1)).
  • Treating “sustained flight” as any pass overhead. A brief, incidental, one-time transit unrelated to the assembly is not sustained flight (AC 107-2A, para 8.3.2.1).
  • Forgetting moving vehicles have their own rule. See 107.145.
  • Assuming a stand-off distance is mandated. Part 107 sets none (AC 107-2A, para 8.3.1).

Try one: an original practice question

A remote pilot flies a Category 3 aircraft that is listed on an FAA-accepted declaration of compliance and labeled for Category 3. The pilot wants to fly it over a crowded outdoor concert. What does Part 107 say?

  • A. It is allowed if the aircraft broadcasts Remote ID
  • B. It is not allowed, because Category 3 operations must not be conducted over open-air assemblies of human beings
  • C. It is allowed if the flight is brief

Answer: B. Section 107.125(b) says a remote pilot in command conducting Category 3 operations must not operate over open-air assemblies of human beings, and AC 107-2A, para 8.3.6.4, lists concerts among possible examples. Option A describes the path available to Categories 1, 2 and 4, not Category 3. Option C is wrong because 107.125(b) has no brevity exception.

If you want more practice like this, Airworthy Prep has a free Part 107 mock exam.

Common questions

Can I fly a drone over people under Part 107?

Only if the person is directly participating, is under a covered structure or in a stationary vehicle that gives reasonable protection, or your operation meets a Subpart D category (14 CFR 107.39).

What is the difference between Category 1, 2, 3 and 4?

Category 1 is for aircraft of 0.55 pounds or less with no lacerating exposed rotating parts. Categories 2 and 3 are performance-based (11 and 25 foot-pounds of kinetic energy) and need a declaration of compliance and a label. Category 4 needs a part 21 airworthiness certificate (14 CFR 107.110, 107.120, 107.130, 107.140).

Can a Category 3 drone fly over a crowd?

Not over open-air assemblies of human beings (14 CFR 107.125(b)). Elsewhere it is limited to closed or restricted-access sites, or to no sustained flight over people who are not participants or under cover (14 CFR 107.125(c)).

Is there a minimum distance I must keep from people?

No. Part 107 sets no specific stand-off distance (AC 107-2A, para 8.3.1).

Does the test cover operations over people?

Yes. It is Task E of Area I, Regulations, in the ACS (ACS FAA-S-ACS-10B, Task I.E, p. 7).

All study guides