Airworthy PrepA&P Powerplant test code
AM.III.F.K7Engine Electrical Systems
A&P Powerplant test (Section III), subject F
Written as am.iii.f.k7 or AM.III.F.K7 on your score report.
The FAA's wording
The procedure for locating the correct electrical cable/wire size needed to fabricate a cable/wire.
What it means
AM.III.F.K7 is a knowledge element in the Engine Electrical Systems subject of the A&P Powerplant test. A knowledge element is something the FAA expects you to know, and the written test asks questions on it.
- AM
- Aviation Mechanic, the mechanic test standard
- III
- Section III: Powerplant
- F
- Subject: Engine Electrical Systems
- K7
- Knowledge element 7
Seeing it on your score report
Your Airman Knowledge Test Report lists an ACS code for each question you missed. Seeing AM.III.F.K7 there means at least one of your wrong answers was on this element. The examiner retests every code on your report during the oral part of the practical test, so study it before then.
Sources: Aviation Mechanic ACS Companion Guide, FAA-G-ACS-1 (Change 2), ch. 2, p. 11 and ch. 5, p. 19; FAA-S-ACS-1, Appendix 1, p. A-1.
The examiner will ask about the codes you missed
"All deficient knowledge areas, as indicated by the ACS codes on the AKTRs, are retested during the oral portion of the test."
Your oral test is 4 random questions plus one for every code on your report, closed book. Our A&P Oral & Practical course builds a mock oral from the codes you tick, with a model answer and FAA source for every question, and a guide for every practical project. $49.
See Oral & PracticalTry a sample question on AM.III.F.K7
Refer to the figure. A 14-volt system needs a wire run of 20 feet from the bus to a component that draws 10 amperes continuously. Using the continuous-operation voltage drop limit, what is the smallest wire size to use?
Practice engine electrical systems
The full A&P Powerplant course has questions on every element in this subject area, with an explanation and FAA source for each.